Bernard Controls AQ Logic RANGE Instructions De Mise En Service page 29

All manuals and user guides at all-guides.com
If your valve still cannot reach closed position, reset the
closing mechanical stop (see §5.5.2) and resume this whole
procedure.
4. Validate Confirm with OK.
The setting screen for the opposite setting appears.
5. Open your valve using the opening knob
An indication of stroke angle appears.
You can validate with OK at any moment; however, if the
Stroke you set is too small, the following error screen
appears.
Validate Try again with OK and continue to open your valve.
When you reach the correct position, validate Save with OK.
The open position confirmation screen appears.
English
.
29