Aqua-Base ARUBA Premium Manuel Utilisateur page 9

AQUA-BASE
ARUBA Premium
Technical manual
On the operation screen all the basic commands are present.
The Auto-Stop function lets you set a limit in time that the machine is running or a volume limit of freshwater
production.
1. Toggle the Auto-Stop switch to enable the function
2. Choose a limit in Time (minutes) or Volume (liters)
3. Set the limit
4. Activate freshwater production by pressing the green ON button.
The watermaker will run until the preset limit is reached and the machine auto-stops after.
The Auto-Flush function lets you set an automatic flush after each stop of the watermaker. The timer lets you
perform an automatic membrane flush,
The Sand-filter-Backwash function is only visible when this option is installed. The button launches the
automatic sandfilter backwash sequence of a 5-minute timer for the manual valve filters.
The screen also provides real-time info on:
• The salinity of the produced water in PPM (parts per million)
• Production flow in liters/hour
•
Running time of the machine in hours
•
ON or "Production" button
Membrane Flushing and Cleaning buttons
Sandfilter backwash button
STOP button
Home screen access button
Flowchart with realtime parameters
Parameters
Fault diagnoses, history
Production limit in time or volume
Auto flush setting
every 14 days for example
(if option is installed)
, to prevent bacterial growth.
REV.H
P9/129