AQUA-BASE
ARUBA Premium
Technical manual
1.3.3
Electrical components
To have a complete overview of the electrical system, consult the corresponding electric diagram in the
chapter §5 "the annexes".
Interface
Emergency stop
7" control touch screen
Electric power box
24VCC 60W Power supply
Variable frequency driver
Transformer
Motor breaker
Motor breaker
Circuit breaker
Circuit breaker
Fuse 1A (5 X 20)
Fuse 2.5A (5 X 20)
Electric control box
Programmable logic controller
Conductivity meter PCB + interface
1.3.4
Interface
All the main controls are found on the front of the machine in the controller's touch-screen menu.
NB: Go to chapter 3.6 to discover all the in-menu features.
The remote control options are described in chapter § 2.6
The EMERGENCY STOP button is located on the power-
box. Once pushed, the power is cut from the pumps and
all its functions stop immediately. The control interface
stays active and displays a notification.
To undo this action, slightly turn the EMERGENCY STOP
button and it'll pop back in its original position.
1.3.5
Home screen and operation menu
On the home-screen, you find access to the principal screens that facilitate all the main and auxiliary
functions of the watermaker.
•
(on the electric power box)
(three phase models)
(three phase models)
(single phase models)
(single phase models)
Model
Serial numder
Running time of the machine in hours
Software version
STOP button
Operation menu button
Flowchart screen with realtime parameters
Parameters
Fault diagnoses, history
REV.H
P8/129
Ref
Alim1
VS40
Tr1
DM40
DM04
DC40
DC04
F1
F2
PLC
CE62