Aqua-Base ARUBA Premium Manuel Utilisateur page 25

AQUA-BASE
ARUBA Premium
Technical manual
3.6.2 Parameter settings
The parameter settings screen lets you select the language of the menu: French, English or Spanish and set
automatic Sandfilter Backwash
an optional
3.6.3 Fault diagnoses – history
This screen facilitates problem-solving a when incident (malfunctioning) occurs. Once a problem is detected
by any of the sensors in the machine, a fault code and alarm message will be coupled and be added to the
list.
The controller displays 2 levels of incidents:
1. Alarm: display of an "orange" message on the "
2. Fault: display of a "red" message on the "
watermaker to protect the components of the watermaker and the on-board installation.
In both cases, intervention is required, to identify the anomaly and put the machine back into operation. To
ease identifying and solving the problem, the fault codes are listed by number in the diagram on the next
page.
•
(only if this option is installed) after each stop of the machine.
Language selection
Set SF backwash after each stop of the machine*
Home screen access button
Operation menu button
Flowchart with realtime parameters
Fault diagnoses, history
STOP button
+
Fault code
Description
When fault occurred (Hourmeter)
Home screen access button
Operation menu button
Flowchart with realtime parameters
Parameters
STOP button
Fault diagnoses, -history
Fault diagnoses, -history
*if automatic sandfiltervalve option is installed
" screen.
" screen and shutdown of the
REV.H
P25/129