Publicité
Les langues disponibles
Les langues disponibles
NOTE: NEVER step on the drain valve.
7. Remove all connecting parts. Detach the Easy Link T-Fitting from the Horizontal Beams first before detaching the others. To detach the T-Fitting from
Horizontal Beams, press the push-button under each T-Fitting that locks the two parts together and pull.
8. Be sure that the pool and all parts are completely dry before storage. Air dry the liner in the sun until it is completely dry before folding (see drawing
Sprinkle some talcum powder to prevent the vinyl from sticking together and to absorb any residual moisture.
9. Create a square shape. Starting at one side, fold one-sixth of liner into itself twice. Do the same on the opposite side (see drawings
10. Once you have created two opposing folded sides, simply fold one over the other like closing a book (see drawings
11. Fold the two long ends to the middle (see drawing
12. Fold one over the other like closing a book, and finally compact the liner (see drawing
13. Store the liner and accessories in a dry, temperature-controlled storage location above 32°F (0°C) and below 104°F (40°C).
14. The original packaging can be used for storage.
1
5
).
6
2
6
OWNER'S MANUAL
&
4
).
7
3
7
).
1
&
).
2
3
).
5
4
13
Publicité
