cecotec CONGA 5290 ULTRA Manuel D'instructions page 37

− The robot will automatically enter standby mode after 10 minutes of no operation.
− Press the power button on the App or the robot to start it up again.
Indicator lights:
− While the robot is charging, the power light will be oscillating blue until the battery is fully
charged.
− Once the battery is fully charged, the "power" light will turn from oscillating blue to steady
blue.
− When the robot is cleaning, the power light will stay steady blue.
− The home light will turn steady orange when the robot is set on the Back home mode or
when there is a battery fault.
− The "power" light will be oscillating red when there is any type of error, or the tank is not
installed.
− The "power" light will be oscillating blue when the robot is in linking mode.
− The robot has a reset button on the side to restart and/or turn it off, by holding it down
for approximately 3 seconds, the robot will turn off and you will need to press the power
button to use it again. Fig 15.
5. MOBILE APP AND WI-FI CONNECTION
− To access all the robot's function from wherever you are, it is suggested to download the
App. It will allow you to efficiently control your robot and enjoy premium cleaning.
− To set the robot in linking mode, hold down the power and home buttons at once for 5
seconds until the power button oscillates in blue.
App advantages:
− Control your robot in an easy and intuitive way.
− Activate the cleaning process from any point.
− Carry out settings and daily scheduling.
− Choose between its different cleaning modes: Auto, Spiral, Edges, Manual, Restricted area,
Spot, Smart area, Back home. Scrubbing and Complete cleaning.
In addition, in every one of the cleaning modes on the app, you will be able to select the
Twice mode, which performs the selected cleaning process twice, and the Turbo mode on
carpets, which activates the maximum suction power when the robot detects a carpet.
− View how the robot creates an interactive map as it is cleaning.
− Manage rooms smartly through its Room Plan function, which allows you to join, separate
or name rooms. Plus, create and schedule your own cleaning plans by selecting the rooms
you want to clean, the mode and power level.
− Check the cleaned surface and the time taken.
− Check the cleaning history.
ENGLISH
37