Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
−
Remove all cables and obstacles from the floor before operating the robot in order to avoid
accidents and damage
−
Set stairs as restricted areas.
Robot buttons
Automatic mode
−
Press the power button on the robot for it to start cleaning automatically, first a cleaning
cycle in Edge mode and then another cycle in an organised zigzag motion, recognising
which areas it has cleaned and which ones it has not. The robot will automatically plan
the cleaning route as it is cleaning. If during this mode the robot is controlled manually,
the robot will calculate the route again and could go through previously cleaned areas. In
order to ensure efficient cleaning, do not operate it manually during auto mode cleaning.
−
Thanks to its Total Surface 2.0 technology, if the battery is low during the cleaning cycle, the
robot will smartly return to the charging base automatically and, once it is fully charged, it
will resume the cleaning process from the same point. During cleaning, the robot will stop
briefly to evaluate the area and calculate the cleaning route (this stop will vary depending
on the house conditions).
Back home mode
−
Press the back home button.
−
This mode can be activated during any other cleaning cycle and the robot will stop cleaning
and return to the charging base automatically.
−
The robot will take the shortest route back to the charging base thanks to its map
memorizing and the smart back home function.
−
When a cleaning cycle has been completed or the robot battery is low, thanks to its
TotalSurface 2.0 technology, the robot will also return to the charging base to avoid
running out of battery. Once the robot has recharged, it will resume cleaning from the point
it has stopped.
Fig. 7
Warnings:
Make sure there are no obstacles in the room being cleaned to ensure the robot can get to the
charging base without problems.
Functions
Pause
While the robot is operating, press the power button on the app or on the robot to pause it and
press the same button again to resume cleaning.
Standby
36
Publicité
