Publicité
Les langues disponibles
Les langues disponibles
Before you proceed, we need you to pay
attention to the following notes:
Do not cover the grill rack with aluminium
foil.
Do not cover the grill rack with aluminium
trays.
•
Keep the appliance away from heat sources.
•
Make sure that the appliance does not
come into contact with flammable material.
•
Do not use charcoal or similar combustible
fuels.
•
Do not operate the appliance if your hands
are wet. Do not operate the appliance if
you are barefoot.
•
Beware of hot parts. The surfaces marked
with a caution symbol for hot surfaces are
liable to become hot during use. The
accessible surfaces can become hot when
the appliance is operating. The outer
surface can become hot when the
appliance is operating.
•
The grill rack becomes very hot during use.
Do not touch the hot grill rack.
•
Use oven gloves if you need to touch the
appliance during or shortly after use.
•
Do not use the appliance in rainy conditions.
Do not use the appliance in humid
surroundings.
•
Do not use the appliance near water
basins, such as ponds or swimming pools.
•
Do not move the appliance while it is
switched on or is still hot. Remove the
mains plug from the wall socket and wait
until the appliance has cooled down.
•
Store the appliance in a dry place when
not in use. Make sure that children do not
have access to stored appliances.
Description (fig. A)
Your 112247/112248 Princess BBQ has been
designed for frying or grilling food without
using fat. The appliance is suitable for indoor
use only. The appliance is suitable for domestic
use only.
1. Thermostat dial
2. Temperature indicator
3. Grill rack
4. Heating element
5. Table
6. Water level indicator
7. Handgrip
8. Table support
Initial use
•
Clean the appliance. Refer to the section
"Cleaning and maintenance".
•
Clean the grill rack with a damp cloth.
Thoroughly dry the grill rack.
Assembly (fig. B)
Before you proceed, we need you to pay
attention to the following notes:
Before assembly, always remove the mains
plug from the wall socket.
Assembling the table (fig. B1 & B2)
•
Insert the ends of the rod (11) into the
holes in the table (5).
•
Mount the handgrips (7) to the table (5)
using the screws (9).
•
Insert the connection pieces (10) into the
handgrips (7).
•
Place the heating element (4) onto the
table (5). Make sure that the heating
element (4) is properly supported by the
rod (11).
•
Make sure that the bracket (21) is properly
inserted into the hole in the control box
(22) in order to activate the microswitch
(fig. B2).
•
Place the grill rack (3) onto the table (5).
112247 - Use with the table support
(fig. B3 & B4)
•
Mount the feet (12) to the lower part (13)
and the upper part (14) of the legs.
•
Insert the lower part (13) into the upper
part (14).
•
Mount a long support bracket (15) and a
short support bracket (16) to the legs using
a bolt (17) and a wingnut (18).
•
Place the base rack (19) onto the support
brackets (15 & 16).
•
Place the table (5) with the connection
pieces (10) onto the legs (20).
10
Publicité
