Bosch VMD01-M50 PAL Manuel D'utilisation page 14

All manuals and user guides at all-guides.com
Example of perspective positioning
Horizontal
Vertical
Direction of movement set 1 or 2
The live image is shown with a small rectangle in the middle of the image
and all movements lead to an alarm being triggered. No permitted direction of
movement is plotted.
Plotting the permitted direction of movement:
The permitted direction of movement is plotted by pressing the left mouse
button in the live image. This is marked by an arrow with two tolerance lines.
These two lines represent the tolerance in the permitted direction of movement.
If the cursor is moved to the arrow tips or the tolerance lines, the cursor symbol
changes. The arrow and tolerance lines can be rotated and the tolerance lines
opened up or made narrower with the left mouse button.
Pressing the mouse button in the opposite arrow direction results in the
appearance of a second arrow with tolerance lines being plotted on the image.
The arrows and tolerance lines can be deleted by dragging a frame over them
with the right mouse button.
5.2.3 Copy parameter sets
Parameter set 2 becomes a copy of set 1, or 1 of set 2.
Programming, continued
– 14 –
English
Longer side
(horizontal perspective)
Longer side
(vertical perspective)
A1 February 03/Trb