en-us Cleaning and maintenance
Part
Suitable cleaning method
Probe
¡
Rotisserie spit
¡
Printed areas (words
and numbers)
These marks are registered trademarks of their respective owners. All other trademarks are trademarks of BSH Home
1
Appliances Corporation or its affiliated companies.
14.3 Cleaning the warming drawer
Part
Suitabel cleaning method
Warming drawer
¡
interior
¡
¡
14.4 Maintenance
Replacing a conventional oven light bulb
When the conventional oven light fails you can exchange
the light bulb.
WARNING
Light socket is live when door is open if main power supply
is not turned off.
Turn off main power supply at the service panel before
▶
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
▶
breaking. Broken glass can cause an injury.
Turn off the power to the oven at the main power supply
1.
in the fuse or breaker box.
36
Wipe with soapy water.
Clean with soapy water and a
dish cloth or brush.
Wash with soapy water.
Rinse thoroughly and dry.
For hard water spots or scale,
use white vinegar. Apply with a
sponge or cloth, rinse, and dry.
Recommendations
Do not submerge in water.
¡
Do not wash in the dishwasher.
¡
Do not soak or clean the rotisserie spit drive in the
¡
dishwasher.
Do not use abrasive cleaners or petroleum based
¡
solvents.
Recommendations
Chlorine or chlorine compounds in some cleansers are
¡
corrosive to stainless steel. Check ingredients on label.
You can remove the warming drawer insert for easier
¡
cleaning.
→ "Removing the warming drawer insert", Page 28
Remove the 3 screws that hold the oven rails in place.
2.
Detatch the oven rails to access the bulb housing.
3.
Remove the screw from the top of the bulb housing.
4.