Thermador Professional Serie Guide D'utilisation Et D'entretien page 16

en-us Accessories
Other accessories
Self cleaning rack for conventional
oven (3 pack)
6.2 Safe use of oven racks
For your safety, follow these recommendations on how to
use the oven racks correctly.
CAUTION
Placement of Oven Racks - Always place oven racks in
desired location while oven is cool. If the rack must be
moved while the oven is hot, do not let potholders contact
the hot heating elements in the oven. Use caution when
removing oven racks from the lowest rack position to avoid
contact with the hot oven door.
CAUTION
To avoid possible injury or damage to the appliance,
ensure oven rack is installed exactly per installation
instructions and not backwards or upside down.
Do not slide any accessories between the rack positions,
or they may tip.
6.3 Inserting the wire rack
The wire rack can be used in the conventional oven on
level 1 to 6.
Requirement: You have read the recommendation on
→ "Safe use of oven racks", Page 16 .
Grasp the rack firmly on both sides.
1.
Tilt the rack up to allow the stop into rack guide.
2.
Bring the rack to a horizontal position and push it in the
3.
rest of the way.
The rack should be straight and flat, not crooked.
6.4 Inserting the telescopic rack
Requirement: You have read the recommendation on
→ "Safe use of oven racks", Page 16 .
16
Use
For ovenware, cake pans and
ovenproof dishes.
These racks do not need to be
removed during SELF CLEAN.
Hold the telescopic rack at a slight angle and engage
1.
the rear hooks in the oven rails on both sides of the
oven cavity.
Hold the rack straight to allow the second tab to rest
2.
over the oven rail.
Push the rack in until it is even with the front hooks.
3.