Costway TQ10119DE Mode D'emploi page 7

Connect the Power Supply & Attach the Seat │ 9
Buttons
Bottom of seat Bottom of seat
1. Plug the connector from the
vehicle body into the connector on the
battery.
2. Fit the seat back to the vehicle body.
3-4. Press and hold the buttons on the
bottom of the seat until the seat is attached to
the body.
12
Attach the Windshield & Roll Bar │ 10
1-2. Insert the mirrors to the
windshield. HINT: The mirrors are
designed to fit vehicle only way.
Insert and tighten two Ø4x14 screws on each mirror.
3. Insert the tabs on the windshield into the holes on the vehicle body, push
until you hear it "click" into place.
4. Insert the tabs on the roll bar into the holes on the vehicle body, push until
you hear it "click" into place.
5. "Click" the dump gate to the dump on the vehicle body.
13