Publicité
Les langues disponibles
Les langues disponibles
Attach the Front Wheels │ 5
Attach the Rear Axle │ 6
Front botttom View
Rear bottom View
Remove all the parts from the front axle.
1. Slide a Ø12 washer onto the front axle.
2. Slide a front wheel onto the front axle.
3. Slide a Ø10 washer onto the front axle.
4. Tighten a lock nut to the end of the front axle with a spanner. DO NOT
over tighten.
5. "Snap" the hubcap to the wheel.
Repeat the above procedure to assemble the other rear wheel.
1. Insert the rear axle into the correct hole on the rear side of the body.
08
09
Publicité
