Publicité
Les langues disponibles
Les langues disponibles
Attach the Driving Wheels │ 7
Rear botttom View
1. Plug the connector of the rear gear box to the connector from the vehicle
body. And fit the rear gear box onto the rear axle.
2. Slide a driving wheel onto the rear axle.
3. Slide a Ø10 washer onto the rear axle.
4. Tighten a locknut to the end of the rear axle with a spanner.
Repeat for the other driving wheel.
5. "Snap" the wheel covers to the wheels.
10
Attach the Steering Wheel │ 8
1-2. Fit the front bumper to the vehicle body, insert four Ø4x14 black screws
and tighten.
3. Insert the handle to the holes in the dash.
4. Plug the sound unit connector on the steering wheel into the connector on
the vehicle body. Then hide the connectors and wires into the steering
wheel.
5. Fit the steering wheel to the steering wheel base on the body.
6-7. Line up the holes on the steering wheel with the holes on the steering
wheel base, insert the M5x40 machine screw. Fasten a
nut on the opposite end of the screw with a
screwdriver.
11
Publicité
