DeWalt DCD991 Traduction De La Notice D'instructions Originale page 31

Batteries
Cat # V Ah
DC
DCB546 18/54 6.0/2.0
DCB547/G 18/54 9.0/3.0
DCB548 18/54 12.0/4.0
DCB549 18/54 15.0/5.0
DCB181 18 1.5
DCB182 18 4.0
DCB183/B/G 18 2.0
DCB184/B/G 18 5.0
DCB185 18 1.3
DCB187 18 3.0
DCB189 18 4.0
DCBP034/G 18 1.7
DCBP518/G 18 5.0
*Date code 201811475B or later
**Date code 201536 or later
***Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
DRILL/DRIVER/IMPACT DRILL
DCD991, DCD996
D WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015/AC:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
D WALT UK, 270 Bath Road, Slough
e
SL1 4DX, England
15.11.2021
Weight (kg) DCB104 DCB107
1.08 60 270
1.46 75* 420
1.46 120 540
2.12 125 730
0.35 22 70
0.61 60/40** 185
0.40 30 90
0.62 75/50** 240
0.35 22 60
0.54 45 140
0.54 60 185
0.32 27 82
0.75 50 240
WALT at the following
e
WALT.
e
Chargers/Charge Times (Minutes)***
DCB112/ DCB115/
DCB113
DCB1102 DCB1104
170 140 90
270 220 135*
350 300 180
450 380 230
45 35 22
120 100 60
60 50 30
150 120 75
40 30 22
90 70 45
120 100 60
50 40 27
150 120 75
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
DCB116 DCB117 DCB118 DCB132 DCB119
80 40 60
110* 60 75*
150 80 120
170 90 125
22 22 22
60/45** 60/40** 60/40**
30 30 30
75/60** 75/50** 75/50**
22 22 22
45 45 45
60 60 60
27 27 27
60 50 50
EnGLIsH
90 X
135* X
180 X
230 X
22 45
60 120
30 60
75 150
22 40
45 90
60 120
27 50
75 150
29