Antari Z-300 Fazer Mode D'emploi page 3

If you experience low output, mechanical noise or no output at all, unplug immediately. Check
fluid level, the external fuse, remote connection, and power from the wall. If all of the above
appears to be O.K., plug the unit in again. If Fazer does not function after 30 seconds,
discontinue operation or permanent damage to the unit may result. Return the machine to
your ANTARI dealer. Always drain tank before mailing or transporting this unit.
Remote Control Operation
Z-6: 10 meter wired multi-function remote controller with 5-pin plug
for ANTARI Fazer Z-300 model.
♦ The interval knob adjusts the time between discharges when the timer function is engaged.
The range is from 10 seconds ~ 250 seconds.
♦ The second knob, labeled volume, controls the volume of haze produced. The range is
from 0% ~ 100% of maximum output.
♦ The yellow TIMER button controls the timer function. Depress the button to activate.
When activated the yellow light will turn on. Adjusting the interval knob will determine the
time between haze output (10 ~ 250 seconds). The duration of output is set at
15 seconds. The volume can be adjusted using the volume knob to control the amount of
haze produced.
♦ The red CONTINUOUS button sets the machine to constant haze production. To activate
this function, depress the red button. The volume knob can be used to regulate the
volume of the steady stream of haze produced.
♦ The green MANUAL button will produce a continuous blast at maximum volume while the
button is held down. When released, the manual function stops and the machine will
return to the previous setting; timer; continuous; or stationary.
♦ Note: the Continuous function will override the Timer function. Therefore, if both buttons
have been depressed the Fazer will haze continuously. The manual function overrides all
functions. When depressed and held down the Fazer will haze at maximum volume for as
long as the button is held down, regardless of the machine's setting at the time.
Fazer Liquid
The Z-300 Fazer machine operates on regular fog liquid. The machine has been designed to
produce exceptional haze using ANTARI fog liquids. Use only ANTARI fog liquids or other
dealer recommended fog fluids. Failure to use high quality fog liquid can damage the
machine.
Do not use liquids designed only for Hazer machines. The Fazer can operate using only fog fluids
or fluids recommended by your dealer that are designed to be used exclusively in the Antari Z-
300 Fazer.
Do not allow the Fazer liquid to become contaminated. Contamination includes adding
fragrances, oils, dust, or any other foreign materials to the Fazer liquid supply. Always replace
the caps on the fog liquid container and the Fazer's liquid tank immediately after filling.
3