tomado TVC2501B Mode D'emploi page 18

STORAGE
To safely store the vacuum cleaner:
• Rewind the cord by pressing the button
• Slide the button on the top side of the tube upwards and push the top part of the tube
downwards to shorten the tube. When you let go of the sliding button, the tube will snap tight.
• Stow the vacuum cleaner away and slide the floor nozzle into the holder on the back of the
vacuum cleaner.
Problem
The suction power is
reduced.
It is difficult to move the
floor nozzle over the floor.
The vacuum cleaner makes
more noise.
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the rules that apply in your country for the separated collection of electric and electronic products.
Correct disposal of the product prevents negative consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
for automatic cord rewinding with your foot.
FREQUENTLY ASKED QUESTIONS
Possible cause
The dust reservoir is full.
The filters are clogged.
The suction power is too high.
The knob on the floor nozzle is not in
the right position.
The tube or hose is clogged.
The dust reservoir filter or the HEPA
filter is blocked.
There is a blockage in the reservoir.
RECYCLING
EN - 18
fig. 5
Solution
Empty the dust reservoir.
Replace the dust reservoir filter or clean the HEPA
filter according to the instructions.
Open the extra suction power controller on
the handle.
Make sure the brushes are retracted on carpet.
Make sure the brushes are extended on hard floors.
Disconnect the telescopic tube and hose and
unclog them.
Replace the dust reservoir filter.
Clean or replace the HEPA filter.
Empty the dust reservoir and clean the reservoir
according to the instructions.