tomado TVC2501B Mode D'emploi page 15

1. Hose connection
2. Dust reservoir
3. Handle
4. Button to unlock the dust reservoir
5. On/off switch
6. HEPA filter behind the grille
7. Cord winding system
8. Button for automatic cord winding
9. Hose
10. Extra suction power controller
11. Snap-on system for connecting the tube to the hose or disconnecting it.
12. Slide button to adjust tube length
13. Telescopic tube
14. Floor nozzle with button for retracting and extending the brushes
15. Button for disconnecting the hose
Follow these instructions when using the vacuum cleaner for the first time: Carefully remove the vacuum cleaner and all
accessories from the packaging and remove all packaging material. Keep the packaging (plastic bags and cardboard) out
of reach of children. After unpacking the appliance, carefully check it for external damage that may have occurred during
transport. Place the vacuum cleaner on a sturdy, dry and flat surface.
Make sure the plug of the vacuum cleaner is not inserted in a socket when (dis)assembling accessories or parts.
HOSE
Connect the hose to the vacuum cleaner: insert the end of the hose in the hose connection on the vacuum cleaner until you
hear a click sound.
Disconnecting the hose from the vacuum cleaner: check that the plug is not in a power socket. Press the unlocking button while
removing the hose from the vacuum cleaner.
TELESCOPIC TUBE
1. Insert the handle of the hose in the telescopic tube, until it snaps in place.
2. Adjust the telescopic tube to the required length. Slide the button at the top of the tube upwards and pull the lower section
of the tube to make it longer. When you let go of the sliding button, the tube will snap in place at the required length.
3. Attach the floor nozzle by sliding the tube firmly into the floor nozzle.
4. Disconnect the hose from the tube by pressing the button of the snap-on system and pulling out the handle of the hose
at the same time.
ACCESSORY
Attach the accessory to the hose handle for different cleaning jobs by firmly sliding it
onto the handle.
Combination crevice tool: for cleaning skirting boards, in corners and small spaces
The combination crevice tool can be used in two ways:
a. folded in as crevice tool or
b. folded out with the brush.
PRODUCT DESCRIPTION
PRIOR TO FIRST USE
ASSEMBLY
EN - 15
/
a. b.