Publicité
Les langues disponibles
Les langues disponibles
Cleaning & maintenance
GB
• ATTENTION! Always disconnect the appliance from the pow-
er supply and cool down before storage, cleaning & mainte-
nance.
• Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this
can adversely affect the life of the appliance and result in a
dangerous situation.
• Food residues should be regularly cleaned and removed from
the appliance. If the appliance is not cleaned properly, it will
reduce its lifespan and may result in a dangerous condition
during use.
Cleaning
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned be-
fore and after use.
• Avoid water contacting the electrical components.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for clean-
ing. Do not use petrol or solvents!
• No parts are dishwasher safe.
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could
damage it.
• Do not move the appliance while it is under operation. Dis-
connect the appliance from power supply when moving and
hold it at the bottom.
8
Troubleshooting
If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
Problems
Possible cause
The appliance
- Power plug is not
does not switch
connected properly
ON.
with the electrical
outlet.
- Without switch ON
the appliance by
turn ON the knob.
- This is normal.
Cooling fan is op-
erating even after
The cooling fan
the appliance is
continues running
switched to OFF
in Standby mode
mode.
for some time to
cool down all inter-
nal elements.
Error code identification
Error codes
Possible cause
E01
The temperature
of the appliance is
too high
Cooling fan
defective
E02
The temperature of
the cookware is too
high. Possibly, the
cookware becomes
empty and appli-
ance will shut down
for protection.
E03
The supply voltage
is abnormal. (Sup-
ply voltage is too
high or too low)
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
In line with our policy of continuous product development we
reserve the right to change the product, packaging and docu-
mentation specifications without notice.
Discarding & Environment
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose
to your waste equipment by handing it over to a
designated collection point. Failure to follow this
rule may be penalized in accordance with applicable regula-
Possible solution
- Check the power
plug to make sure
it is connected
properly.
- Switch ON the ap-
pliance by turning
ON the knob.
- Wait until the
cooling fan stops
rotating.
Possible solution
Unplug the appliance,
remove the cookware,
wait until the appliance is
completely cool down.
Contact the supplier.
Unplug the appliance,
remove the cookware,
wait until the appliance is
completely cool down.
Make sure that the
appliance is connected
to a suitable electrical
power supply.
Publicité
