Proper use
Use this high pressure cleaner exclusively
for:
Cleaning machines, vehicles, buildings,
–
tools.
with accessories and spare parts ap-
–
proved by Kärcher.
Symbols on the machine
High pressure jets can
be dangerous if improp-
erly used. The jet must
not be directed at per-
sons, animals, live elec-
trical equipment or at
the appliance itself.
Danger of damage to
the machine on account
of frozen water! Store
the appliance in a heat-
edroom during winter or
empty it.
Risk of hearing impair-
ment. Always use prop-
er ear-protection aids
while working with the
appliance.
Risk of injury! Wear
safety goggles.
Risk of burns on ac-
count of hot surfaces!
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water
flowing through a system separator is con-
sidered non-drinkable.
16
All manuals and user guides at all-guides.com
Caution
Always connect the system separator to
the water supply, never directly to the appli-
ance!
Immediate danger that can cause severe
injury or even death.
Possible hazardous situation that could
lead to severe injury or even death.
Caution
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.
Risk of injury!
–
–
–
–
–
–
–
–
–
– 2
EN
Safety instructions
Danger or hazard levels
Danger
Warning
High pressure hose
Danger
Only use original high-pressure hoses.
The high-pressure hose and the injec-
tion system must be suitable for the
maximum operating pressure given in
the Technical Data.
Avoid contact with chemicals.
Check the high-pressure hose daily.
Do not use hoses with kinks.
Stop using the high-pressure hose if the
external wire layer is visible.
Do not use the high-pressure hose any-
more if the winding is damaged.
Lay the high-pressure hoses in such a
way that no vehicle can drive over it.
Do not use high-pressure hoses that
have been driven over, kinked, pressed
or bent even if there is no externally vis-
ible damage.
Store the high-pressure hoses in such a
way that they are not subject to any me-
chanical load.
The maximum torque for the screw con-
nections of the high pressure hose is 20
Nm.