Midea MP08DRWBA1RCM Mode D'emploi page 9

Window Installation Kit
Exhaust hose
Unit adaptor Air exhaust
passage
Hook
Hole Seat
Adaptor Lower
groove
Before assembly
Window
Sliders
After assembly
1+2：
Bolt
1+2+3：
Bolt
1+2+3+4：
1+4：
Installation
Exhaust hose
assembly
Make sure the adaptor
is inserted into the
lower groove of the
air outlet.
Bolt
Bolt
Bolt Bolt
Bolt
Step One: Preparing the exhaust hose
assembly
Press the exhaust hose into the Air exhaust
passanger and unit adaptor, clamp automatically
by elastic buckles of the adaptors.
Step Two: Install the exhaust hose
assembly to the unit
Insert unit adaptor of the Exhaust hose assembly
into the lower groove of the air outlet of the
unit with the hook of the adaptor aligned with
the hole seat of the air outlet and slide down
the Exhaust hose assembly along the direction
indicated by the arrow for installation.
Step Three: Preparing the adjustable
window slider
1. Choose the window sliders according to
the size of your window. Sometimes, sliders
need to be cut short to meet the window
size, please take extra care to cut it properly.
2. Use bolts to fasten the window sliders once
they are adjusted to the proper length.
Windows Type
Window
slider A
Hung Window
8
Window
slider A
Sliding Window