Publicité
Les langues disponibles
Les langues disponibles
Foam seal B
(Adhesive
type-shorter)
Foam seal A
(Adhesive
type)
Window slider
(if required)
Window slider
Foam seal C
(Non-adhesive type)
Security
Bracket
2 Screws
NOTE
To ensure proper function, DO NOT overextend or bend the hose. Make sure that there are no
objects within 20in (~500mm) of the exhaust hose. All illustrations in this manual are for
Installation
Type 2: Sliding window installation
1.
Cut the adhesive foam seal A and B strips to the proper lengths,
and attach them to the window sash and frame as shown.
2.
Insert the window slider assembly into the window opening.
3.
Cut the non-adhesive foam seal C strip to match the window
height. Insert the foam seal between the glass and the window
frame to prevent air and insects from getting into the room.
4. If desired, install the security bracket with 2 screws as shown.
5.
Insert the window slider adaptor into the hole of the window
slider.
10
Publicité
