Publicité
4. Operation
To access the control panel functions, use the four buttons located underneath the
Control
display.
Panel
Operation
The menu structures of the Scorpion™ GBC 2.0/RGY products have seven branches,
Menu
as follows:
Branches
•
•
•
•
•
•
•
•
•
Changing
To change an option on the same menu branch, do the following:
Options on the
Current Menu
Branch
Changing
To change an option on a different menu branch, you must exit the current branch.
Options on a
Different Menu
Branch
Page 12 of 52
All manuals and user guides at all-guides.com
Button
Function
Press to find an operation mode or
<MENU>
to back out of the current menu
option
Press to scroll down the list of
<DOWN>
options or to find a lower value
Press to scroll up the list of options
<UP>
or to find a higher value
Press to activate a menu option or a
<ENT>
selected value
Auto/Sound (13 option)
Laser Sky Color (4 options)
Laser Sky Effect (1 option)
Sound Sensitivity (10 options)
DMX address (503 options)
Slave (1 option)
Reverse (2 options with two values each)
The control panel will remember the last setting you programmed, even after you
have turned the product off.
In addition, the control panel will remember the last selected option from each menu
branch.
1.
Press <MENU> once (the LED display will blink).
2.
Press <UP> or <DOWN> until the desired menu option shows on the LED
display.
3.
Press <ENT> to accept the new option (the new option will show solid on the
LED display).
1.
Press <MENU> once (the LED display will blink).
2.
Press <MENU> repeatedly until seeing the active option of the desired menu
branch.
3.
Press <UP> or <DOWN> until the desired menu option within the new menu
branch shows on the LED display.
4.
Press <ENT> to accept the new option (the new option will show solid on the
LED display).
Scorpion™ GBC 2.0/RGY User Manual (Rev. 2 ML)
Publicité
