Publicité
3. Setup
This product has an auto-ranging power supply and can work with an input voltage
AC Power
range of 100~240 VAC, 50/60 Hz. See the label affixed to the back plate of the product
or refer to the specifications chart. The listed current rating indicates its average current
draw under normal conditions.
Power Linking
This product provides power linking via the Edison outlet located in the back of the unit.
Power Linking
Diagram
Page 10 of 52
All manuals and user guides at all-guides.com
Always connect this product to a protected circuit (circuit breaker or fuse). Make
sure that it has an appropriate electrical ground to avoid the risk of electrocution
or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
To other
products
You can power link up to 37 Scorpion™ GBC 2.0 products on 120 VAC or up to
74 Scorpion™ GBC 2.0 products on 230 VAC.
You can power link up to 39 Scorpion™ RGY products on 120 VAC or up to 63
Scorpion™ RGY products on 230 VAC.
The power linking diagram shown above corresponds to the North American
version of this product ONLY! If using this product in other parts of the world,
consult with your local CHAUVET® distributor, as power linking connectors and
requirements may differ in your country or region.
2
Product
rd
3
Product
Scorpion™ GBC 2.0/RGY User Manual (Rev. 2 ML)
st
1
Product
nd
Publicité
