Unify OpenStage M3 Ex Consignes De Sécurité page 17

All manuals and user guides at all-guides.com
Using the OpenStage M3 Ex / OpenStage M3 Ex
Plus handset in potentially explosive environ-
ments
The handset fulfils the requirements of the ATEX directive
and meets the required EN and IEC standards (see
page 28). See also the notes in the declaration of confor-
mity in the operating manual.
The OpenStage M3 Ex / OpenStage M3 Ex Plus is
designed for use in potentially explosive working environ-
ments (Ex zones) and complies with fire prevention regula-
tions. Local and operational factors may lead to an
explosive atmosphere in an Ex zone. Therefore, please
observe the following Ex safety notes:
Handset:
● The handset may only be operated in Ex zones where it
is certified.
● Users must check the handset for damage and verify
that it is operating correctly before using it in the Ex
zone. A damaged handset or a handset that is not fully
functional may not be brought into or used in the Ex
zone.
● The cover of the battery compartment must be tightly
screwed on to satisfy the Ex protection and IP rating
IP65 (casing protection) requirements in an Ex zone.
Deactivate the handset immediately and remove it from
●
the Ex zone if the following situations occur:
– You notice damage to the handset.
– You notice damages to the battery.
– If liquids have seeped into the handset.
● Replace a damaged handset immediately.
● Only employees of Unify Software and Solutions Soft-
ware and Solutions GmbH & Co. KG with Ex zone train-
ing and authorisation should repair and service the
handset.
● When replacing a malfunctioning device/battery, the
technician must return the malfunctioning device/battery
to the manufacturer stating the customer data.
Inappropriate use of the handset will result in revocation
●
of its certification for use in Ex zones.
17