Publicité
Les langues disponibles
Les langues disponibles
2.
INSTALLATION
2.1 Clock mounting options
Make the cut-out for recess mounting in the wall according to the dimensions below.
1
Place the clock so as to mark the location of the 4 fixing holes.
2
Please also refer to the following centre distances.
Remove the clock and drill 4 holes Ø6 mm to insert wall plugs.
3
Feed the cable through the cut-out.
4
Make the connections at the back of the clock depending on your model (see next chapter).
5
Apply a silicone seal on the clock to ensure tightness with the wall (see next chapter).
6
Attach the clock to the wall using 4 screws Ø4 mm.
7
Profil 730 OP
16
A
B
70 (mini)
380
Ø 6 mm
C
D
350
280
Dimensions in mm
EN
Ø 4 mm
E
370
Publicité
