Télécharger Imprimer la page

Bodet Profil 730 Hospital Manuel D'installation page 14

Publicité

Les langues disponibles

Les langues disponibles

1.
INITIAL CHECKS
Thank you for choosing a Bodet clock. This product has been carefully designed to ensure your
satisfaction, adhering to quality processes ISO9001 and ISO14001.
We recommend that you read this manual carefully before installing the product.
Retain this manual for reference throughout the lifespan of your product so that you can refer to it
when necessary.
Failure to follow these instructions may cause irreversible damage and invalidate the warranty. In
that case, BODET cannot be held liable.
Non-contractual data. BODET reserves the right to make certain functional, technical or aesthetic
changes to the clocks without prior notice.
This manual is subject to change without notice. To obtain the latest version of this documentation,
please refer to our website: www.bodet-time.com.
1.1 Presentation of the clock
The Profil 730 Hospital (OP) clock is a recess-mountable analogue clock designed for hospital use
(operating theatres).
These instructions relate to "24V MIN Impulse, 24V SEC Impulse and AFNOR" models. For other
models, please see the corresponding instructions.
24V Minute Impulse: the clock is a receiver controlled by a master clock that sends minute impulses
on a parallel line.
24V Second Impulse: The clock is a receiver controlled by a master clock that sends second
impulses on a parallel line.
AFNOR ELV: the clock is a receiver controlled by a master clock that sends AFNOR NFS-87500A
messages and powered by a 6-24V low voltage network.
1.2 Unpacking the clock
Carefully unpack the clock and check the contents of the package. This should include:
- the clock,
- this manual or a quick start guide.
Version: at the back of the clock is a product label stating the version of the clock.
1.3 Cleaning
Use an antistatic product to clean the clock.
1.4 Safety instructions - precautions for use
1.4.1 Use of the instructions
Read the safety instructions carefully before installing the clocks.
Observe the safety tips at all times during installation, use and maintenance of the product.
Key to symbols:
indicates advice, a recommendation or other practical information,
indicates that special attention needs to be paid.
14
EN

Publicité

loading

Ce manuel est également adapté pour:

608769a