Etekcity EK8060 Mode D'emploi page 9

EN
Symbols
Solids
Using Your Scale
Note:
• For accurate results, always place the scale on a hard, dry, flat
surface, and keep the scale away from dirt, dust, vibrations, wind, air
currents, and electromagnetic interference.
• When you turn on the scale, choose units, or use the tare function,
wait for the display to read
• The batteries are pre-installed in the scale. Turn the scale over and
pull the plastic strip out from the battery compartment.
General Operation
1. Place the scale on a hard, flat, level surface.
2. Press
TARE
Press UNIT
the right of the display.
3. Place your item on the scale.
4. Wait for the reading on the display to stabilize.
All manuals and user guides at all-guides.com
to turn on the scale. Make sure the display reads
to select your desired measuring unit, which will show on
Water (Liquid)
before measuring.
9
Milk
.