Etekcity EK8060 Mode D'emploi page 10

EN
Zero / Tare Function
Whenever you measure items inside a container, you can use the tare
function to remove the container's weight from the final measurement.
1. Press
TARE
the screen does not display
auto-adjust to zero.
Place the container on the centre of the scale.
2.
3. Wait for the reading on the display to stabilize. The display will show the
container's weight.
4. Press
TARE
display
5. Place the liquid or items into the container. The scale will measure the
contents without including the weight of the container.
6. When you're done, reset the scale by removing all weight and pressing
again.
TARE
All manuals and user guides at all-guides.com
to turn on the scale. Make sure the display reads
to tare the weight of the container. The screen should now
.
automatically, press
Figure 2.1
10
. If
to
TARE
[Figure 2.1]