Publicité
VPS10 Panel Scope
The VPS10 Panel Scope can be powered by means of an adapter, transformator or a battery.
Attention:
Use a non-regulated or regulated adapter of 9VDC that supplies a min. of 300mA.
For car use, mount a 315mA fuse and a 22ohm (1W) resisitor in series with each other and with the power supply.
To prevent damage to the panel scope, connect the input to the sound source through a 1/1 transformer.
!
Another possibility is to pick up the sound signal by means of a microphone that is connected to the input of the panel scope.
All manuals and user guides at all-guides.com
TM
Fuseholder
Fig 1.0
POWER SUPPLY
5
Open chassis transformer 1.8VA (1 x 6V / 1 x 0.3A),
ordernr. 106001
Encapsulated transformer 1.8VA (1 x 6V / 1 x 0.3A),
ordernr. 1060018M
Type PS905 for 230V / PS905USA for
Car battery
Power supply
7
Publicité
