Publicité
Safety & Warnings
Symbols displayed on the unit
!
Important safety information, see user
Ground level
6
All manuals and user guides at all-guides.com
manual.
SAFETY AND WARNINGS
The Panel Scope is ideally suited for measurements of
category II installations with pollution degree 1 and using a
maximum of 600V, in accordance with the IEC1010-1 norm.
Consequently, all measurements should be avoided in case
of polluted or very humid air. One should also refrain from
measuring conductors or installations that use voltages that
exceed 600Vrms above ground level. CAT II indicates
conformity for measurements of domestic installations.
The maximum input voltage for the connections of the unit
stands at 100Vp (AC+DC)
Do NOT open the enclosure while performing measurements.
Remove all test leads before opening the enclosure in order
to avoid electrical shock.
Use a measuring probe with an insulated connector when
measuring voltages exceeding 30V. (PROBE60S).
VPS10 Panel Scope
TM
Publicité
