Panasonic CF-30 Serie Mode D'emploi page 4

Read Me First
<Only for model with wireless LAN>
This product (local network devices) for the band
5150-5250 MHz is only indoor usage to reduce potential
for harmful interference to co-channel Mobile Satellite
systems.
High power radars are allocated as primary users (mean-
ing they have priority) of 5250-5350 MHz and 5650-5850
MHz and these radars could cause interference and/or
damage to LELAN devices.
This device has been designed to operate with the Ra-
diall/Larsen whip antenna, type NMO5E2400BKTNC
WLAN antenna having a maximum gain of 5dB. A WLAN
Antenna having a higher gain is strictly prohibited per
regulations of Industry Canada. The Required antenna
impedance is 50 ohms.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more
than that required for successful communication.
Models for U.S.A. / Canada
E
As an NERGY
E
the NERGY
Outline of the International
E
The international
saving through the use of computers and other of ce equipment. The program backs the development and dis-
semination of products with functions that effectively reduce energy consumption. It is an open system in which
business proprietors can participate voluntarily. The targeted products are of ce equipment such as computers,
displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.
For information about
Web site: www.energystar.gov
A lithium ion battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
4
All manuals and user guides at all-guides.com
30-Ca-2-1
S
®
TAR Partner, Panasonic Corporation has determined that this product meets
S
®
TAR guidelines for energy ef ciency.
E
NERGY
S
®
NERGY TAR Of ce Equipment Program is an international program that promotes energy
E S
®
NERGY TAR , refer to the following web side:
<Only for model with wireless LAN>
RF Exposure Warning
This equipment has been approved for mobile operation,
and unless otherwise advised in separate supplemental
instructions for individual wireless transmitter(s), requires
minimum 20 cm spacing be proved between antenna(s)
and all person's body (excluding extremities of hands,
wrist and feet) during wireless modes of operation.
S
®
TAR Of ce Equipment Program
22-M-1
48-M-1