Roco 38 DR Serie Mode D'emploi page 51

▪ Operation with a DCC Command Station (multiMAUS)
Because the multiMAUS (from Firmware Version V1.05) has over 28 function keys and a light sensor, it is particularly convenient to operate.
You can also control your locomotives via WLANMAUS for wireless freedom combined with the advantages of the practical multiMAUS.
A further variation for easy operation is the Z21 app via your smartphone or tablet. The app even permits you to easily import all locomotive
data and preset functions from our database.
Programming modes:
We recommend: Direct CV programming (byte-wise) or POM mode (programming on the main track).
The programming process is described in the multiMAUS/WLANMAUS manual. You can find information on programming with the Z21 app under
https://www.z21.eu/de/z21-system/z21-app/tutorials
Reading CVs:
With the appropriate equipment (e.g. / Z21 / z21 / z21start ), you can read the value.
▪ More Functions
You can find out about a range of other possible settings, which are probably very rarely needed, relating to drive speed curve, load control setting
or noise synchronization from the detailed handbook. This can be downloaded as a pdf document MS450P22 from www.zimo.at.
71381.indd 51 71381.indd 51
51
10.10.2023 07:16:24 10.10.2023 07:16:24