Publicité
Les langues disponibles
Les langues disponibles
▪ Locomotive Settings
The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous decoder properties to your wishes however.
Certain parameters (referred to as CVs – Configuration Variable – or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the decoder not reacting correctly.
The decoder is preprogrammed with 28/128 speed steps at the factory for a high level of comfort. This means that it can be used together with
all of the modern DCC (multiMAUS) and Motorola
The Sounddecoder has been especially modified for the additional functions and must not be
replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the programming track.
▪ CV-Liste
CV
Name
1
Address (= short address)
2
Minimum speed (lowest creeping speed)
3
Start-up delay (from standstill to maximum speed)
4
Braking delay (from maximum speed to stand-still)
5
Maximum speed
71381.indd 49
71381.indd 49
control devices.
®
Value
Default Value
01 – 99
3
01 – 255
1
00 – 255
20
00 – 255
18
00 – 255
210
49
10.10.2023 07:16:24
10.10.2023 07:16:24
Publicité
