Publicité
Les langues disponibles
Les langues disponibles
Instruction manual
• Never move the appliance by pulling the cord and make sure the cord
can not become entangled.
• The use of accessories that are not recommended by the manufacturer
can cause injuries and will invalidate any warranty that you may have.
• Allow the appliance to cool down before you clean or store it.
• Unplug the appliance from the socket when changing the spare parts
or for maintenance.
• To protect yourself against an electric shock, do not immerse the cord,
plug or appliance in the water or any other liquid.
• Do not use this appliance with a damaged cord or plug or when the
appliance has malfunctions, or has been damaged in any manner. To
avoid a hazard make sure that a damaged cord or plug will be replaced
by an authorized technician(*). Do not repair this appliance yourself.
• Unplug the appliance from the socket when you are not using it.
• Note: To avoid danger by accidental resetting the thermal protection, this
appliance may not be powered through an external switching device, such
as a timer, or connected to a circuit that regularly will be switched on or off.
• Allow the device to cool down before you are going to remove or
replace spare parts.
• Do not use this appliance near direct heat sources.
• Make sure the cord does not touch the hot parts of the appliance.
• Do not use this appliance in the bathroom or near a sink filled with water.
If this appliance has fallen into the water do not under no circumstances
directly grab this appliance, but first pull the plug from the socket.
• Make sure that the cord is not hanging over the edge of the table or
counter, does not touch any hot surfaces or is coming directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverings etc.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
4
should return the appliance to this repair service.
PaRTS DeSCRIPTIoN
1. Self-clean button
2. Spray button
3. Spray head
4. Soleplate
5. Water tank cover
6. Steam rate control button
(for decreasing steam)
7. Handle iron
8. Water tank
9. Burst of steam button
10. Power indicator
11. Temperature indicator
12. Temperature knob
BeFoRe The FIRST uSe
• Carefully read all instructions before using the iron.
• Clean the soleplate with a soft damp cloth before the iron will be used
for the first time.
• Pull out the water tank cover and slowly fill the water tank with clean
cold water using the measuring cup.
• Smell or smoke may disperse at the beginning as caused by the
warming up of the insulation material.
• Note: Some particles may come out of the soleplate when you use the
iron for the first time. This is normal; the particles are harmless and stop
coming out of the iron after a short while.
4
3
5
6
2
1
9
7
8
12
10
11
Publicité
