Publicité
Les langues disponibles
Les langues disponibles
Parts supplied for
installation
"|
aot
(4.4 cm)
od
(2.5 cm)
©
©
ST! c y
©
ay
®
2-#10x2"
anti-tip
phillips head screws
brackets
« Anti-tip bracket must be securely
attached to a wall stud. Thickness of
finished wall may require using
longer screws to anchor the bracket.
¢ L.P. conversion kit is included in
literature package.
* Backguard and island trim. The
backguard included with the range
must be installed when a standard
24" (61 cm) deep base cabinet is
used and there is zero clearance
between the back edge of range
and combustible rear wall.
For island installations or other
installations with more than 7"
(25.4 mm) clearance to back wall,
use the optional stainless steel
island trim, included with the range,
to cover the backguard mounting
flanges.
Product
Dimensions
30" (76.2 cm)
a
cooktop width
\
45" (114.3 cm)
overall height
36" (91.4 cm)
cooktop
height with
feet loosened
3/4 turns
1/4" (6.4 mm)
spacer
30° (76.2 cm)
width
26-1/2" (67.3 cm)
width with
control panel
NI
Cabinet Opening
Dimensions
For minimum
_F|
clearance to top of
13° (33 cm) max.
range, see NOTE.*
upper cabinet depth
30° (76.2 cm) min.
upper cabinet width a
4" (10.2 cm) min. clearance
from both sides of range to
>
side wall or other
combustible material
Tt
30-1/4" (76.8 cm)
18"
(45.7 cm)
opening width
upper cabinet
to countertop
*NOTE: 36° (91 cm) min. when bottom of wood or metal
cabinet is protected by not less than 1/4" (6.4 mm) flame
retardant millboard covered with not less than No. 28 MSG
sheet steel, 0.015" (0.4 mm) stainless steel, 0.024"
(0.6 mm) aluminum or 0.020" (0.5 mm) copper.
42" (107 cm) min. clearance between the top of the
cooking platform and the bottom of an unprotected wood
or metal cabinet.
junction box to be
located in this area
gas line opening to be
located in this area
5-1/2" (14 cm)
Publicité
