Black & Decker BCW201 Mode D'emploi page 13

Fig. J
3
Hints for optimum use
Warning: Let the tool work at its
own pace. Do not overload.
• Do not place your hands over the
ventilation slots.
• Do not exert too much pressure on the
tool.
• Regularly check the condition of the
sanding sheet. Replace when necessary.
• Always sand with the grain of the wood.
• When sanding new layers of paint before
applying another layer, use extra fine grit.
• On very uneven surfaces, or when
removing layers of paint, start with a
coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually
change to a fine grit for a smooth finish.
Maintenance
Warning: To reduce the risk of
serious personal injury, turn unit o
and remove the battery pack before
making any adjustments or
removing/installing attachments or
accessories. An accidental start-up can
cause injury.
Important: To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this
(Original instructions)
manual) should be performed by authorized
service centers or other qualified service
personnel, always using identical
replacement parts.
Protecting the environment
Separate collection. This product
must not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Reuse of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of
their working life. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your
local BLACK+DECKER o ce at the address
indicated in this manual. Alternatively, a list
of authorised BLACK+DECKER repair agents
and full details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com.
Cleaning
Warning: Never use solvents or other
harsh chemicals for cleaning the
non-metallic parts of the tool or
power supply. These chemicals may weaken
the plastic materials used in these parts. Use
a cloth dampened only with water and mild
soap. Never let any liquid get inside the tool
or power supply; never immerse any part of
the tool or power supply into a liquid.
ENGLISH
13