Publicité
Les langues disponibles
Les langues disponibles
2.2 - Drive internal connection
This connection procedure can be used for first commissioning or one-off setting by an
authorized person. In the other cases, the side flange option with RJ45 connector must
be used as described in section 2.1.
• Install or uninstall Field RTC Keypad option at least 10 minutes after the
Commander ID300/302 power down.
• When the cover is open, the Commander ID300/302 degree of protection is
IP10. Any work should only be carried out by experienced and qualified personnel. Once
the drive powered on, to do the settings with the Field RTC keypad, an electrical authori-
zation is necessary. If this is not the case, always use the side flange with RJ45 as descri-
bed in section 2.1.
Step 1: Use a Torx 25 screwdriver to unscrew the cover.
Size 1 or 2
12
All manuals and user guides at all-guides.com
Field RTC Keypad
1
1
Installation and connections
5690 en - 2018.03 / a
Size 3
Publicité
