Publicité
Les langues disponibles
Les langues disponibles
2 - OPTION CONNECTION
2.1 - ID-3 CABLE-RJ45-FLANGE side flange connection
We recommend this connection procedure for a simple and easy use of the keypad.
NOTE
When the Field RTC Keypad is connected via the ID-3 CABLE RJ45 Flange option,
Commander ID300 motor and drive becomes IP20.
To obtain a higher ingress protection, use a Remote Keypad RTC or Remote keypad (IP54
or IP65 keypads for through-panel mounting on machine housing or electrical cabinet)
connected to the drive via a divisible cable gland. For more information, please contact
Leroy-Somer.
Step 1: Unscrew the protective plug of the side flange RJ45 connector by one quarter-turn.
Step 2: Connect the keypad cable to the connector. Power up the drive if this has not been
done already (can be connected when the drive is powered on). Make the required settings for
the application.
Step 3: Once settings or diagnostics are finalized, unplug the RJ45 cable from the side flange,
and screw the protective plug again.
Installation and connections
5690 en - 2018.03 / a
All manuals and user guides at all-guides.com
Field RTC Keypad
1
2
RJ45
11
Publicité
