Publicité
Les langues disponibles
Les langues disponibles
• Insert the end of the copper tubing into the
connection as far as possible. While holding the
tubing, tighten the fitting.
Tubing Clamp
¼ in. Compression
Nut
Ferrule
(sleeve)
10
Turn the water on at the shutoff valve.
Tighten any connections that leak.
CAUTION
• Check for leaks at all water line connections.
Leveling
The refrigerator has two front leveling legs. Adjust
the legs to alter the tilt from front-to back or side-to
side. If the refrigerator seems unsteady, or the
doors do not close easily, adjust the refrigerator's
tilt using the instructions below:
1
Turn the leveling leg to the left to raise that
side of the refrigerator or to the right to lower
it. It may take several turns of the leveling leg
to adjust the tilt of the refrigerator.
2
Open both doors and check to make sure that
they close easily. If the doors do not close
easily, tilt the refrigerator slightly more to the
rear by turning both leveling legs to the left. It
may take several more turns, and be sure to
turn both leveling legs the same amount.
All manuals and user guides at all-guides.com
Turning on the Power
¼ in. Tubing
Refrigerator
Connection
Position the Refrigerator
• After installing, plug the refrigerator's power cord
into a 3-prong grounded outlet and push the
refrigerator into the final position.
CAUTION
• Connect to a rated power outlet.
• Have a certified electrician check the wall
outlet and wiring for proper grounding.
• Do not damage or cut off the ground terminal
of the power plug.
• Arrange the refrigerator so that it does not
vibrate against adjoining surfaces or against the
wall. Be sure to maintain at least a 2" clearance
behind the refrigerator for proper ventilation.
INSTALLATION
15
Publicité
