Publicité
Les langues disponibles
Les langues disponibles
10 INSTALLATION
Choosing the Proper Location
Electricity
Use an individual, grounded outlet:115 Volts, 60 Hz,
AC, 15 Amps minimum.
WARNING
• Do not overload house wiring and cause a
fire hazard by plugging in multiple appliances
in the same outlet with the refrigerator.
• To reduce the risk of electric shock, do not
install the refrigerator in a wet or damp area.
Flooring
To avoid noise and vibration, the unit must be
installed and leveled on a solidly constructed floor.
If required, adjust the leveling legs to compensate
for the unevenness of the floor.
NOTE
• Installing on carpeting, soft tile surfaces, a
platform or weakly supported structure is not
recommended.
Ambient Temperature
Install this appliance in an area where the
temperature is between 55 °F (13 °C) and 110 °F
(43 °C).
If the temperature around the appliance is too low
or high, cooling ability may be adversely affected.
All manuals and user guides at all-guides.com
Installing the Rear Spacers
This feature is only available on some models.
• There are 2 rear spacers included with the
NOTE
• The spacers help improve the energy efficiency of
accessory kit inside the appliance. Install the
spacers on the upper corners at the back of the
appliance.
the appliance by providing clearance between the
back of the appliance and the wall. This allows for
improved air circulation.
Publicité
