Below the exploded view of your appliance (second part of the
manual), you find a list with all parts of which the appliance is
composed. This list includes a symbol that specifies the material
of each part, so you can use it to check how you have to maintain
a particular part. The parts list uses the following symbols:
Symbol
Chrome
Wrought iron
Powder coated
8
WARRANTY
8.1 Covered
Your appliance comes with a warranty of two years, starting from
the date of purchase. This warranty covers all manufacturing
defects, provided that:
You used, assembled and maintained your appliance
•
according to the instructions in this manual. Damages
caused by misuse, incorrect assembly or inadequate
maintenance are not regarded as manufacturing defects.
You can present the receipt and the unique serial number of
•
your appliance. This serial number starts with a C, followed
by 15 digits. You can find it:
On this manual.
-
On the packaging of the appliance.
-
On the bottom of a leg of the tripod.
-
The Barbecook quality department confirms that the parts
•
are defective and that they proved defective under normal
use, correct assembly and adequate maintenance.
If one of the above conditions is not met, you cannot claim any
form of contribution. In all cases, the warranty is limited to the
repair or replacement of the defective part(s).
8.2 Not covered
The following damages and defects are not covered by the
warranty:
Normal wear and tear (rusting, distortion, discolouration...) of
•
parts that are directly exposed to fire or intense heat. It is
normal to replace these parts from time to time.
Visual irregularities that are inherent to the manufacturing
•
process. These irregularities are not regarded as
manufacturing defects.
All damages caused by inadequate maintenance, incorrect
•
storage, improper assembly or modifications made to
pre-assembled parts.
All damages caused by misuse and abuse of the appliance
•
(not using it according to the instructions in this manual,
using it for commercial purposes...).
All consequential damages caused by careless or
•
non-compliant use of the appliance.
Rust or discolouration caused by external influences, the use
•
of aggressive detergents, exposure to chlorine... These
damages are not regarded as manufacturing defects.
All manuals and user guides at all-guides.com
Material
www.barbecook.com
7