Güde HPC 150 M Mode D'emploi page 53

Apparatus
(pictures are a pattern only)
High-pressure cleaning equipment
HPC 150 M
Powerful petrol high-pressure cleaner in a
carrying basic frame To be used on any place
because no electric power is needed for its
operation.
Outfit:
Stable basic frame and the bed plate,
professional aluminium pump, high-quality, spray
device with variable nozzle and chemicals
injector. Pressure hose 5 metre long, hose holder
and the pistol. Economy motor and a cable
starter with rubber feet to secure the firm
position.
Scope of Application:
Your high pressure petrol driven cleaner is
designed for cleaning works in open countryside.
For cleaning of machines, trucks, tools,
structures, facades, terraces, garden tools etc..
Scope of Delivery and
Description of Parts (fig. 1)
•
Spray gun handle (1)
•
Pipe for water (to the jet) (1)
•
High pressure hose (5 m)
•
Water supply connection (1)
•
Key for spark plugs (1)
•
Jet cleaner (1)
•
Instruction manual (1)
1. Guide/holder of water pipe
2. Spray gun
3. Crook for hanging the pressure hose
4. Petrol tank
5. Reverse starter
6. Safety valve
7. Air filter
8. Connection to water main
9. On/Off switch
Fig. 13
19. Gas lever
Choke
20.
Petrol cock
21.
Guaranty
For the claims on guaranty performance se
enclosed letter of guaranty.
General Safety Regulations
Read carefully the whole operation manual
before first use of the apparatus. In case of any
doubt related to connection and attendance of
the apparatus contact the manufacturer (service
department).
All manuals and user guides at all-guides.com
53
READ CAREFULLY FOLLOWING
INSTRUCTIONS FOR SECURING HIGH
GRADE SECURITY:
Danger of injury! The corresponding safety
provisions shall be always observed when
working at the petrol stations or in other
dangerous areas.
The water polluted with oil shall not be
discharged into soil, ground water or waste
water systems. Therefore the engine and
chassis of the apparatus shall be cleaned
only on places specially determined for these
activities and equipped for disposal of old oil.
Read carefully all instructions and all orders
related to safety. Nonobservance of safety
instructions and orders may cause electrical
accident, fires and/or serious injuries. Keep safe
for future use all safety orders and cautions.
Safety on the Workplace
•
The apparatus with empty tank shall be
placed in a well ventilated place. No fuel
or oil is permitted to be placed near the
apparatus.
•
The apparatus shall be placed on a hard
and load-bearing surface.
•
The apparatus may only be used in open
countryside and shall not be operated in
closed spaces; the exhaust gases may
endanger the life!
•
The working apparatus shall be in safe
distance from the object being cleaned.
•
The persons and children standing
nearby shall keep sufficient distance from
the apparatus.
•
During the operation the apparatus shall
be all the time under supervision
Safety of Persons
•
Be constantly concentrated, pay
attention on what you are doing and
use common sense when working
with the apparatus. Even a moment
of inattention may cause serious
injuries. Wear
gloves, because during the spraying
very small
generated.
•
Wear always noise protectors at
work.
•
When working wear always long
trousers and solid footwear or high
boots. When
cleaning agents or other etching or
abrasive means
protection
recommended.
always protecting
particles may be
using chemicals,
the additional
outfit/wear is