Husqvarna 572 XP Manuel D'utilisation page 36

Approved cutting equipment for Husqvarna 572 XP, 572 XPG
Guide bar
Length, in Pitch, in
24 3/8
28
24 3/8
28
24 3/8
28
The usable cutting length is usually 1 in less than the
nominal guide bar length.
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
H42
C85/C83/C85S/
C83S
S85
7/32 in/5.5 mm
H46
H47
H48
To sharpen the square ground chain professional knowledge and special tools are necessary.
C83SK
We recommend to let your Husqvarna dealer sharpen the square ground chain.
36
Gauge, in Max. nose radius
0.058 11T
0.050 11T or 42 mm
11T
0.050 11T or 42 mm
11T
Husqvarna file gauge to restore the sharpness of the
saw chain. The part numbers are given in the table
below.
If you are not sure how to identify what saw
chain you have on your chainsaw, please refer to
www.husqvarna.com for more information.
505 69 81-30
586 93 85-01
586 93 85-03
0.025 in/0.65 mm
531 30 00-81
531 30 00-81
531 30 00-81
Saw chain
Type Length, drive
links (no.)
Husqvarna C85S 84
93
Husqvarna 84
C83SK
93
Husqvarna C83S 84
93
25°
30°
30°
25°
25°
25°
140 - 011 - 11.05.2023
55°
60°
60°
55°
55°
55°