Télécharger Imprimer la page

Husqvarna 572 XP Manuel D'utilisation page 24

Masquer les pouces Voir aussi pour 572 XP:

Publicité

Les langues disponibles

Les langues disponibles

To do a check of the throttle trigger and
throttle trigger lockout
1. Make sure that the throttle trigger and throttle trigger
lockout move freely and that the return spring works
correctly.
2. Press down the throttle trigger lockout and make
sure that it goes back to its initial position when you
release it.
3. Make sure that the throttle trigger is locked at the
idle position when the throttle trigger lockout is
released.
4. Start the product and apply full throttle.
5. Release the throttle trigger and make sure that the
saw chain stops and stays stationary.
WARNING:
when the throttle trigger is in the idle
position, speak to your servicing dealer.
To do a check of the chain catcher
1. Make sure that there is no damage on the chain
catcher.
2. Make sure that the chain catcher is stable and
attached to the body of the product.
24
If the saw chain rotates
To do a check of the right hand guard
Make sure that the right hand guard does not have
damages such as cracks.
To do a check of the vibration damping system
1. Make sure that there are no cracks or deformation
on the vibration damping units.
2. Make sure that the vibration damping units are
correctly attached to the engine unit and handle unit.
Product overview on page 2 for information
Refer to
about where the vibration damping system is on your
product.
To do a check of the start/stop switch
1. Start the engine.
2. Press the start/stop switch down to the STOP
position. The engine must stop.
To do a check of the muffler
WARNING:
arrester and spark arrester mounting
face may contain deposits of combustion
particles on the surfaces that may be
carcinogenic. To avoid skin contact and
inhalation of such particles when cleaning
and/or servicing the spark arrester, make
sure you always:
wear gloves;
clean and/or service in a well ventilated
area;
do not use pressurized air to clean the
spark arrester screen;
use a steel brush and brush away from
your body when cleaning the spark
arrester.
WARNING:
that has a defective muffler or a muffler
that is in bad condition. Return product to
A used muffler/spark
Do not use a product
140 - 011 - 11.05.2023

Publicité

loading

Ce manuel est également adapté pour:

565572 xp g