Metal Grease Filter - Haier HCH2400ACB Instructions D'installation Et Guide De L'utilisateur

METAL GREASE FILTER

1. Disconnect power.
2. Lift up on the front panel of the range hood to access the metal grease filters.
a
3. Wash the metal filter, as needed, either in the dishwasher or with a solution of
hot water and dish detergent.
4. Allow time for the filter to dry completely.
5. Replace the grease filter.
6. Reconnect power.
CHARCOAL FILTERS (NON-VENTED [RECIRCULATION]
INSTALLATIONS ONLY)
The charcoal filter should last for up to 6 months with normal use. The charcoal filter
is not washable; it must be replaced with a new filter.
To Remove and Replace Charcoal Filters:
1. Disconnect power.
2. Follow the previous steps to remove the metal grease filter from the hood.
3. Locate the charcoal filters one on each side of the blower, and turn each one
slightly to disengage it from the metal studs.
4. Remove the two used charcoal filters and discard.
5. Locate the two studs extending from the top and bottom of the intakes on both
the right and left sides of the blower.
20
a
b
b
Filter Release
Front Panel