Electrical Requirements - Haier HCH2400ACB Instructions D'installation Et Guide De L'utilisateur

Roof Venting:
b
Wall Venting:
b
Non-Vented (recirculating):
b

ELECTRICAL REQUIREMENTS

Observe all governing codes and ordinances.
Ensure that the electrical installation is adequate and in conformance with National
Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22.1-94,
Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local
codes and ordinances.
If codes permit and a separate ground wire is used, it is recommended that a
qualified electrician determine that the ground path is adequate.
8
a
a
Roof Cap
b
6" (15.2 cm) Round Vent
a
a
Wall Cap
b
6" (15.2 cm) Round Vent
a
a
Deflector
b
6" (15.2 cm) Round Vent