Korg PANDORA stomp EFGSJ 1 Manuel D'utilisation page 26

LCD backlight
You can switch how the LCD backlight will light up.
When "On" is selected, the backlight will remain lit up.
When "Eco" is selected, the backlight will light up for
only approximately five seconds after a button or the foot
switch is used.
If you are using battery, the battery life will be shorter if the backlight is on.
Setting the Power Save function
When "Off" is selected, the Power Save function is disabled.
With the default setting "On," if there has been no button
or foot switch usage or input to the PANDORA stomp for
at least four hours while the AC adapter is being used, the
Power Save function will be activated.
Loading the factory-set data
Here's how to load the preloaded data. This will load the factory‐set effect programs,
Rhythm mode, and Utility mode settings.
Be aware that if you reload the factory programs, the user programs and any set‐
tings that are user made will be overwritten.
1 While holding down the RHYTHM button and the A Button, turn on the power.
26