will enter Mute mode. In Bypass mode, the PANDORA stomp will bypass the effects
to output the original dry sound (with no effects), and the tuner will be activated. In
Mute mode, no sound is produced, and the tuner is activated.
To return to Play mode from Bypass or Mute mode, press the foot switch again, or
press the PLAY/EDIT button.
Tuner
You can use the tuner when the unit is bypassed or
muted.
1 Play a single string on your guitar or bass.
The LCD will show the calibration, and the tuner dis‐
play will show the note name.
2 The meter of the tuner display will indicate that the
instrument is correctly tuned. Tune the instrument
until the center of the LED meter lights up.
Calibration (Standard pitch A = 440)
The calibration will appear on the LCD, and the Value
dial can be used to adjust it within the range of A = 438
Hz–445 Hz. The calibration setting you specify will remain until the power is turned
off. Once the power is turned off, calibration will be reset to A = 440 Hz.
note
name
LED meter
calibration
15