Korg PANDORA stomp EFGSJ 1 Manuel D'utilisation page 29

C, D buttons (TYPE ▲, ▼)
B OD*, B DIST*, B FUZZ*
PREAMP1*, PREAMP2*, BALANCE*
LOWCUT*
FRETLES*
AMP: Amp Modeling
In order to take full advantage of the characteristics of Amp Modeling, we recom‐
mend that you use it in conjunction with Cabinet Modeling when listening through
headphones or when recording from the line output. Types marked by an asterisk (*)
indicate effects for bass guitars.
If you have selected SYNTH as the effect type, use the Value dial on each parameter
page to set the filter depth and decay, and to select and adjust the waveform (see p.31).
Value Dial
Amount of distortion.
Adjusts tone. (
0.0–10.0)
Specify the frequency.
Adjusts tone.
(0.0–10.0)
(1.0–10.0)
(0.0–10.0)
29